linux – 惠普智能阵列;如何安全地从阵列中删除带有SMART预测故障的物理驱动器,以便可以更换？

hpacucli controller slot=1 ld 1 show detail

Smart Array P400 in Slot 1

   array A

      Logical Drive: 1
         Size: 273.3 GB
         Fault Tolerance: RAID 1+0
         Heads: 255
         Sectors Per Track: 32
         Cylinders: 65535
         Stripe Size: 128 KB
         Status: OK
         Array Accelerator: Enabled
         Unique Identifier: xxxx
         Disk Name: /dev/cciss/c0d0
         Mount Points: /boot 196 MB,/ 7.8 GB
         Logical Drive Label: xxxxx
         Mirror Group 0:
            physicaldrive 1I:1:8 (port 1I:box 1:bay 8,SAS,72 GB,Predictive Failure)
            physicaldrive 1I:1:7 (port 1I:box 1:bay 7,OK)
            physicaldrive 1I:1:6 (port 1I:box 1:bay 6,OK)
            physicaldrive 1I:1:5 (port 1I:box 1:bay 5,OK)
         Mirror Group 1:
            physicaldrive 2I:1:4 (port 2I:box 1:bay 4,OK)
            physicaldrive 2I:1:3 (port 2I:box 1:bay 3,OK)
            physicaldrive 2I:1:2 (port 2I:box 1:bay 2,OK)
            physicaldrive 2I:1:1 (port 2I:box 1:bay 1,OK)

hpacucli controller slot=1 show

Smart Array P400 in Slot 1
   Bus Interface: PCI
   Slot: 1
   Serial Number: xxxx
   Cache Serial Number: xxxx
   RAID 6 (ADG) Status: Disabled
   Controller Status: OK
   Chassis Slot:
   Hardware Revision: Rev D
   Firmware Version: 4.06
   Rebuild Priority: Medium
   Expand Priority: Medium
   Surface Scan Delay: 15 secs
   Post Prompt Timeout: 0 secs
   Cache Board Present: True
   Cache Status: OK
   Accelerator Ratio: 100% Read / 0% Write
   Drive Write Cache: Disabled
   Total Cache Size: 256 MB
   Battery Pack Count: 0
   SATA NCQ Supported: True

运行这一系列命令是否安全？

hpacucli controller slot=1 array A remove drives=1:8
hpacucli controller slot=1 pd 1:8 modify led=on

伸出手来取下驱动器并更换.然后运行：

hpacucli controller slot=1 array A add drives=1:8

这会让阵列安全地重建吗？

解决方法

（编辑：安卓应用网）

【声明】本站内容均来自网络，其相关言论仅代表作者个人观点，不代表本站立场。若无意侵犯到您的权利，请及时与联系站长删除相关内容!